Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
fuss:raspberry_pi [2020/05/08 18:51] – [Logging-in via SSH over USB] office | fuss:raspberry_pi [2020/05/08 21:55] – [Connecting to a Bridge Automatically] office |
---|
| |
The first attempt would be to try connecting via the assigned DNS address: ''ssh pi@raspberry.local'' and enter ''raspberry'' at the password prompt. if that fails, a packet sniffer such as WireShark or TcpDump may reveal the initial Raspberry Pi's ARP requests for Google's DNS servers (''8.8.8.8''). Sometimes just restarting the bonjour service and disabling and re-enabling the RNDIS interface may get the Raspberry Pi to register its name. | The first attempt would be to try connecting via the assigned DNS address: ''ssh pi@raspberry.local'' and enter ''raspberry'' at the password prompt. if that fails, a packet sniffer such as WireShark or TcpDump may reveal the initial Raspberry Pi's ARP requests for Google's DNS servers (''8.8.8.8''). Sometimes just restarting the bonjour service and disabling and re-enabling the RNDIS interface may get the Raspberry Pi to register its name. |
| |
| ===== Connecting to a Bridge Automatically ===== |
| |
| In order to connect the Raspberry Pi to a bridge as it is connected to a server, [[fuss/linux#automatically_add_all_rndis_devices_to_a_bridge|an udev rule can be written]] that will match all RNDIS adapters and connect them to a bridge. |
| |
| The only changes required on the Raspberry Pi is to edit ''/etc/network/interfaces.d/usb0'' and add the lines: |
| <code> |
| auto usb0 |
| iface usb0 inet dhcp |
| </code> |
| |
| and save the file. This will make sure that when the Raspberry Pi boots, an IP address will be requested over the ''usb0'' interface and will work provided that the computer that the Raspberry Pi is connected to is running a DHCP server on the other end. |
| |
====== Enabling Monitor Mode via Nexmon Drivers ====== | ====== Enabling Monitor Mode via Nexmon Drivers ====== |