Differences

This shows you the differences between two versions of the page.

--- fuss:hardware [2021/10/17 22:56] – [USB Pinout] office
+++ fuss:hardware [2021/10/17 23:00] – [Jump Start Dead Batteries] office
@@ Line 326: / Line 326: @@
 Hopefully, the effect will be that the battery will be charged just enough for the battery charger to pick up the battery voltage and accept to charge the battery.
-This was carried out on a Sony SP73 LiIon battery powering a Sony MX2 that was completely drained to the point that the IMAX charger reported "Connection break..." and refused to charge the battery. However, the same technique should apply perfectly to other battery types as well. Just make sure to wear protection glasses. :)
+This was carried out on a Sony SP73 LiIon battery powering a Sony MX2 that was completely drained to the point that the IMAX charger reported "Connection break..." and refused to charge the battery. However, the same technique should apply perfectly to other battery types as well. Another example is [[/fuss/roomba#fixing_charging_error_onebattery_not_charging|the case of the battery contained within Roomba robots]] that have a base station that is extremely fussy about charging batteries and consistently refuse to charge batteries that are below a certain charge threshold. In the case of the Roomba, fortunately, the IMAX picks up the battery and it does not need to be jump started as per the case of the Sony SP73 battery.
+Just make sure to wear protection glasses. :)