unt to about an USD8 penalty, whilst damaging the Amiga board or the FastATA itself can reach up well in the 100s of USDs. | {{hardware_amiga_fastata-indivision_assembly_layers_requirem... l just bend the pins instead of cutting them. | {{hardware_amiga_fastata-indivision_assembly_layers_requirement_ni... soft to the touch. Rubber is also a good one. | {{hardware_amiga_fastata-indivision_assembly_layers_requirement_co... u about 4 tries in case something goes wrong. | {{hardware_amiga_fastata-indivision_assembly_layers_requirement_40
t can be hidden inside the power source case.
{{hardware:amiga:hardware_amiga_making_the_amiga_smart_stepdown_module.png?512}}
* jack power ... e power supply case and power the WeMoS board.
{{hardware:amiga:hardware_amiga_making_the_amiga_smart_jack_power_connector_plugs.png?512}}
* W... out having to wire the serial port beforehand.
{{hardware:amiga:hardware_amiga_making_the_amiga_wemos_d1_mini.png?512}}
* the following electr... he Parallel Circuit to the Power Supply ======
{{hardware:amiga:hardware_amiga_making_the_amiga_smart_power_supply_modification.png?512}}
The po
ices which produces some issues in Workbench.
{{hardware:amiga:hardware_amiga_kmtech_autoswitcher_in_elbox_blackbox_case_switch... et soldered onto the extended motherboard PCB.
{{hardware/amiga/hardware_amiga_kmtech_autoswitcher_in_elbox_blackbox_case_1d1_cn... ket of solder and open it up for the IDC pins.
{{hardware:amiga:hardware_amiga_kmtech_autoswitcher_in_elbox_blackbox_case_cleani... into the back of the Blackbox using a Dremel.
{{hardware:amiga:hardware_amiga_kmtech_autoswitcher_in_elbox_blackbox_case_drilli
appear to fill in the blank ''FF''s.
The [[fuss/amiga/hardware#re-programming_nec-based_usb_pci_card_for_amiga_mediator|string that must be changed]] is right at the start and illustrated in the following image.
{{amiga:amiga_hacking_the_spider_usb_atmel_bios_modified.png?512}}
Change the sequence:
<code>
33 10 33 10 33 1
quired equipment.
====== Downloads ======
* {{hardware:amiga:blizzard_1230_scsi_iv_8.5.rom|Blizzard 1230 SCSI ... packs a mean punch is the "MiniPro TL866II+":
{{hardware:amiga:programming_the_blizzard_scsi_kit_iv_eeprom_progr... , a ''PLCC32'' to ''DIP32'' adapter is needed.
{{hardware:amiga:programming_the_blizzard_scsi_kit_iv_plcc32_to_di... M27C256'' and fully supported by the TL866II+.
{{hardware:amiga:programming_the_blizzard_scsi_kit_iv_am27c256.png
.
The tutorial offers some notes on the required hardware used and how to operate a TL866 Pro in order to burn two Amiga ROM chips with kickstart 3.1.4.
====== Requireme... e levers and open the Xgpro flashing software.
{{hardware:amiga:hardware_amiga_burning_kickstart_chips_assembly.png?512}}
The X... ly the IC type has to be set to ''AM274096'':
{{hardware:amiga:hardware_amiga_burning_kickstart_chips_xgpro_settings.png?512}}
... main Xgpro screen should show the loaded data.
{{hardware:amiga:hardware_amiga_burning_kickstart_chips_program.png?512}}
Select
er to the IDC header on the Amiga motherboard.
{{hardware:amiga:hardware_amiga_reworking_the_clockport_expander_for_desktop_mach... esult onto the pins of the clockport expander.
{{hardware:amiga:hardware_amiga_reworking_the_clockport_expander_for_desktop_mach... 14) and the black lead to pin 34 (signal A15).
{{hardware:amiga:hardware_amiga_reworking_the_clockport_expander_for_desktop_mach... ered directly on the cap that goes over Gayle.
{{hardware:amiga:hardware_amiga_reworking_the_clockport_expander_for_desktop_mach
out ======
The pinouts can be seen on the [[fuss/amiga/hardware#power_supply_unit_pinouts|FUSS Amigahardware page]]. Namely, we need to dismantle the ATX powe... t be matched to the leads of the power supply:
{{hardware:amiga:hardware_amiga_custom_power_supply_leads.png?512}}
Another modi... y have a power button on the ATX power supply.
{{hardware:amiga:hardware_amiga_custom_power_supply_pson.png?512}}
====== Final Result ======
{{hardware:amiga:hardware_amiga_custom_power_supply_final_result.png?512}}
n the producer's website or mirrored here:
* {{hardware:amiga:hardware_amiga_using_scsi2sd_drives_scsi2sd.zip|scsi2sd.zip}}
... the drive is to be placed in the SCSI chain).
{{hardware:amiga:hardware_amiga_using_scsi2sd_drives_sd_sector_size.png?512}}
Th... e configured, the following settings are made:
{{hardware:amiga:hardware_amiga_using_scsi2sd_drives_sd_drive_configuration.png?5... but the ''Read/Write'' option may be ghosted.
{{hardware:amiga:hardware_amiga_using_scsi2sd_drives_winuae.png?512}}
WinUAE doc
t ======
Even with the new Mediator 1200 TX, the Amiga still does not receive the correct amount of powe... low,
* you may get very weird output with wrong hardware identifiers for the accelerator and the mediator ... er to the motherboard instead. Unfortunately, the Amiga motherboard does need the $-12V$ line to be power... a P9 for which we have the following pinouts:
{{amiga:amiga_fixing_elbox_mediator_power_issues_at_conne
and are commonly used in retrocomputing such as [[hardware/amiga/using_scsi2sd_drives|being used with Commodore Amiga computers]] or Macs. Even though the hardware is quite robust and precious, the software is very amteurish ... ue to the tool not waiting enough for the Windows hardware enumerator to switch between normal and DFU progr... d will not be recognized and there will be no USB hardware devices detected on either Windows or Linux.
A s
er off the main 5V rail from the power supply.
{{hardware_amiga_bootsting_power_to_clockport_expander_mount.png?5... the clockport expander has been mounted into the Amiga and attached directly to the power-source - this can involve either soldering the cable to the Amiga main power socket or otherwise depending on your
ering the wires back together, you can use the [[:hardware/amiga/custom_power_supply|older tutorial on refurbishin... s go to what pins.
====== Gallery ======
{{gallery>hardware:amiga:rebuilding_the_commodore_power_supply?direct}}
