chassis).
====== ATX PowerSupply ======
{{fuss_hardware_atx_power_supply_pinout.png}}
To start the powersupply, connect ... les necessary to wire a computer. When building a custom computer such as an Amiga with non-standard hardware, the cabling can become pretty complex such that ... mponents from the same power outlet.
{{fuss:fuss_hardware_molex_power_distributor_front.png?512}}
{{fuss:fuss_hardware_molex_power_distributor_back.png?512}}
{{fuss:fuss_hardware_molex_po
====== About ======
The powersupply unit (PSU) shipped with the Amiga is said to be underpowered (rated at $\approx 25W$) and it is common knowl... called a Goliath PSU, which is essentially an ATX powersupply that has been coupled with the Amigapower cable. If you have an ATX powersupply, it can be easily converted to be used with the A... out ======
The pinouts can be seen on the [[fuss/amiga/hardware#power_supply_unit_pinouts|FUSS Amigahardware page]]. Namely, we need to dismantle the ATX powe... t be matched to the leads of the powersupply:
{{hardware:amiga:hardware_amiga_custom_power_supply_leads.png?512}}
Another modification that must b
ering the wires back together, you can use the [[:hardware/amiga/custom_power_supply|older tutorial on refurbishing a PC ATX powersupply]] in order to get the colors right. It is ... use an Ohmmeter to measure which wires go to what pins.
====== Gallery ======
{{gallery>hardware:amiga:rebuilding_the_commodore_power_supply?direct}}
er to be administered remotely - such as toggling power on and off, configuring server parameters at run time, checking hardware health status and overall providing a web-based m... signing_ilo_project_box.png?256}}
* A 4pin ATX powersupply molex cable - the cable will be cut and connected... ---+
| LiPo Battery | v ATX powersupply standby voltage (+5VSB)
+--+-+---------+ ... o battery charger is connected both to a 4pin ATX powersupply molex and one lead is drawn from the positive lin
GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERM... PERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_... set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I... _PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_P
For the contact, copyright, license, warranty and privacy terms for the usage of this website please see the
contact,
license,
privacy,
copyright.